PVC Profile Wrapping Machine

This machine is specialized in laminating PVC decorative film rolls on the surfaces of PVC/PVC foaming/WPC/WPC foaming board, and also with protective film laminating together;
Chat Now

Product Details

Introduction

FM1300 Model Cold Glue Laminating Machine

For PVC foam boards


Product pictures 1 Product pictures 2


Product pictures 3 Product pictures 4


Part 1. Performance and Application:

● This machine is specialized in laminating PVC decorative film rolls on the surfaces of PVC/PVC foaming/WPC/WPC foaming board, and also with protective film laminating together;

● It adopts single-component solvent polyurethane glue as adhesion.


The decorated products:


Product pictures 5 Product pictures 6


Part 2: technical parameter of FM1300 Model

)M7)RWHDEI[9F9@DU76969S


Part 3. Machine List and Flow chart of FM1300

IQR`(~M8P[7R$E)~AO$CUFG


Product pictures 7


Part 4. Basic assembly of FM1300

4.1) The first part: convey part:

1) Dimension: 2500×1800×900(L×W×H);

2) It adopts 10# channel steel to make frame;

3) It adopts seamless pipe with 45# steel (which knurled patterns on the surface) inside to make convey rollers.

4) It adopts green conveying belt (made in Shanghai China) and installed 45# steel to make baffling wheels to prevent deviation.

5) It adopts anti-static eliminator and double rolling brushes with 2.2kw exhaust fan to cleaning the dust of boards.

4.2) Thermo printing part:

1) Dimension: 4000x2150x1800mm(L×W×H);

2) It adopts rectangle steel and 10# channel steel to weld the frame of machine;

3) It adopts 45# steel to make the drive chain-wheels, bevel gears and drive axes;

4) The drive motor is cycloid decelerating motor (power is 3kw) and the working speed is controlled by frequency inverter;

5) It adopts seamless steel pipe wrapped with NBR to make conveying rollers and pressure rollers and the thickness of the NBR is 20mm;

6) It adopts cylinder and adjusting valve to control pressure to adjust the distance between the materials;

the diameter of cylinder is 63x150 and the working pressure is 4kg;

7) It adopts pneumatic core shaft as the unwinding shaft, it adopts DZF-215 type magnetic powder brake to control the tension (the magnetic powders are made by Ningxia Mechanism graduate school);

8) It adopts cold rolled steel plate to make bearer of glue container; the hand wheel to control glue container to up and down through worm wheel and worm shaft.

9) It adopts 1set of hot steel roller and 2sets of big NBR rollers¢200mm to pressing film with boards together with air cylinder control;

10) It adopts air expansion shaft as unwinding shaft of protective film, then pressing by 1set of NBR roller to pressing protective film on the laminated boards, which can protect PVC film no damage in transportation.

4.3) collecting part:

1) Dimension: 2000×1800×900(L×W×H);

2) It adopts 10# channel steel to make frame;

3) It adopts stainless steel roller as conveying roller;

4.4) electric panel

It welds by cold rolled steel boards (thickness1.5mm) then finishes by paint. The inside is installed the contactor, inductor, capacitance, fuse, air switch and line bank. The surface of panel is various buttons, knobs, urgent switches, TC and transducers, etc.


5. Our Services

Payment term:

30% advanced payment by T/T,

70% by T/T before delivery after the machines test to be OK in seller’s factory.


Machine Commissioning, Adjusting and Training:

1. The seller should send staff to help to install, adjust the machines and train the buyer’s staff after notified by buyer.

2. The buyer should pay the seller for all the expenses of test, including travelling tickets back and forth, accommodation & food, personal safety, etc..


Inquiry