Spc Flooring UV Coating Machine

This line is special to coating Matt UV lacquer on the SPC floor after laminated PVC film and anti-scratch layer.
Chat Now

Product Details

GT1300 Type Roller UV Coating Line for SPC floor

Product pictures 1(001) Product pictures 2(001)


Product pictures 3(001) Product pictures 4(001)


Product pictures 5_副本1 Product pictures 6_副本1  Product pictures 7_副本1


1. Performance and Application

◎ This line is special to coating Matt UV lacquer on the SPC floor after laminated PVC film and anti-scratch layer.

◎ The effective coating width is 1300mm and coating thickness is better over 2mm.


2. Technical parameter of GT1300

1

Max. printing width

1300mm

2

Printing speed

2~25m/min

3

Thickness of board

2~50mm

4

Electric heating power

18kw

5

UV curing power

9kw*2+9kw*3pcs=45kw

6

Transmission power

16.5kw

7

Total power

90kw, actually working power is around 70kw

8

Power supply

3phase,380V,50Hz

9

Visual sizes(L*W*H)

33500*2200*1700mm

10

the consumption of UV varnish

8~15g/m2


3. The flow chart and machine list of GT1300

Product pictures 8


No.

Name of each machine

QTY(set)

Price/unit

Amount/RMB

1

Conveying with brush cleaning

1

18000

18000

2

Single-roller Coating Machine

1

48000

48000

3

5m IR heating Machine with motor

2

20000

40000

4

2-UV lamp Drying Machine

1

42000

42000

5

Double-roller Coating Machine

1

72000

72000

6

5m IR heating Machine without motor

1

16000

16000

7

3-UV lamp Drying Machine

1

48000

48000

8

Collecting table

2

5000

10000


TOTAL AMOUNT



294000RMB


4. Every scheme and performance of every part:

4.1) convey part:

1) Dimension: 2500×1800×900(L×W×H);

2) It adopts 10# channel steel to make frame;

3) It adopts seamless pipe with 45# steel (which knurled patterns on the surface) inside to make convey rollers, controlled by 0.75kw timing motor.

4) It adopts green conveying belt (made in Shanghai China) and installed 45# steel to make baffling wheels to prevent deviation.

5) It adopts rolling brush with 2.2kw exhaust fan to cleaning the dust of boards.

4.2) UV Coating unit (one roller&two rollers)

1) Dimension: 3000/4000×2100×1350(L×W×H);

2) It adopts 100x80 rectangle pipe to make frame and adopts Q235 steel to make wallboard;

3) It adopts seamless steel pipe with 45# steel shaft knurled surface inside to make convey roller, which is controlled by timing motor with Frequency inverter controlled.

4) It adopt green conveying belt to transmitting boards with baffle plate to prevent deviation.

5) It adopt worm gear lifting device to control dovetail guide to control thickness of boards.

4.3) heating flattening part*3units

1) Dimension: 5000×1800×1000(L×W×H);

2) It adopts cold rolling steel after bent to make frame;

3) It adopts 1.5mm cold rolling plate to make cover;

4) it adopts 1000w infrared lamps( made in Wuxi ) inside the heating oven to heat the UV glazing oil and the maximum temperature is 80℃;

5) It adopts green plastic conveying belt ( made in Shanghai ) to transmit whose size is 10000x1300x3mm;

6) It adopts 1.1kw motor as drive power.

4.4) UV drying unit(two UV lamp dryer&three UV lamp dryer)

1) Dimension: 2500x1800x1600(L×W×H);

2) The frame of this unit is made of 8# channel steel and adopts 2mm cold rolling plate to make seal board of case;

3) The conveying roller adopt seamless steel pipe (45#steel shaft in the middle);

4) It adopts 2/3 pcs UV solidifying lamps whose power is 9kw to curing the oil and the voltage is 380 V;

5) It adopts ventilating fan to vent whose power is 1.5kw ( made by Wuxi Luoshe Fan Factory ), flux is 1200M³/h, pressure is 1250Pa;

6) It adopts 45# steel to make the chains;

7) It adopts 1.5mm cold rolling steel after paint to make the cover;

4.5) conveying unit (used for collecting boards)*2units

1) Dimension: 2000×1800×900(L×W×H);

2) It adopts 10# channel steel to make frame;

3) It adopts zinc-plated conveying rollers to conveying boards, so it’s easy to collecting boards;

4.6) electric panel

1) It adopts Chinese famous brand;

2) The electric case hung down the equipment according to the dynamical points distributing;


Hot Tags: spc flooring UV coating machine, China, manufacturers, suppliers, custom, discount

Inquiry

You Might Also Like