off Line PVC Ceiling Hot Stamping Machine

off Line PVC Ceiling Hot Stamping Machine

We design this machine is special used for transfer printing designs from PET foil onto flat PVC panel online within 300mm wide, the machine will be installed before Haul-off and after calibration table.
Chat Now

Product Details

Since establishment, our company has been focusing on the field of WPC Foam Board Hot Stamping Machine, Lamination Machine For PVC Window Profile, Cold Glue Laminating Machine, with strong R&D capabilities and rich strategic experience. We've been strict with every part of our work. If vital, welcome to make contact with us by our web page or telephone consultation, we've been likely to be pleased to serve you.

Introduction  

ONLINE HOT STAMPING MACHINE(BETTER ONE) OTR300 Model


Product pictures 1


Performance:

◎ We design this machine is special used for transfer printing designs from PET foil onto flat PVC panel online within 300mm wide, the machine will be installed before Haul-off and after calibration table.

◎ It has air expansion shaft as unwinding shaft and also adopt magnetic powder brake to control tension of PET foil;

◎It adopt heating system to stamp designs from PET foil onto PVC panel through silicon roller, so the machine working is much better than without heating system.

◎ It is installed on extrusion line, so the center height is 1m per extrusion line. If any special height, please let us know, we will make accordingly.

◎ The working speed of hot stamping machine is similar to extrusion line, so it can save two or three employees at least.


Flow chart

Product pictures 2


Technical parameter of machine:

Max width of hot stamping

300mm

The speed of hot stamping

Per speed of extrusion line

Thickness of panels

2—50 mm

Transmission power

0.12kw for glue coating roller

Heating power

3kw

Power source

Single phase,220V, 50 Hz

Visual sizes

(L*W*H) 1500 × 1000× 1800 mm

When using as hot stamping

Use hot stamping glue


Through the unremitting efforts of all employees, we continue to improve quality management to ensure that our off Line PVC Ceiling Hot Stamping Machine will always be a product trusted by customers. We devote our utmost efforts to the continuous development of new technologies, continuous improvement of manufacturing processes and quality control, which lay a solid foundation for perfect service. In line with the principle of serving customers, mutual benefit and win-win, we promise to win more profit for you with the best service attitude, the most advanced service concept and the most professional service team.

Inquiry

You Might Also Like