PUR hot melt glue lamination machine
This wrapping machine use PUR glue system which is specialized in different kinds of material adhesive. It can design the wrapping veneer, PVC, Paper, PET etc for different kinds of materials profile like aluminum, MDF, WPC.
Performance and Applications
◎ This machine is used for PUR hotmelt glue laminating , the PUR hotmelt glue has good and reliable adhesion and also it is environmental protection without any solvent chemical.But if the surface of PVC profile has more wax when extruded, it’s better to use primer to cleaning the surface of PVC profiles, then the adhesion will be more better;
◎ It is used to laminating PVC decorative film rolls, wood veneer, decorative paper and other decorative film rolls on the surface of various profiles within 300mm wide;
◎ The decorated profiles like PVC/UPVC window profiles, WPC/PVC foam door frames, MDF profiles, aluminum window profiles and etc;
The photo of decorated profiles
Max effective profile width
Thickness of profiles
2-80mm(adjustable, it also can make per the thickness of profiles if you have special height of profiles)
Polyurethane hot melt adhesive
2-40m/min(adjustable), better over 10m/min speed
Dust cleaning power
0.07kw for rolling brush+0.25 for blower+2.2kw exhaust fan=2.52kw
Glue Melter power
Heating fan power
Weight of machine
3000*1100*1850mm for brush cleaning+primer coating+glue coating;
4000*900*1300mm for film wrapping part;
Domestic brand, reliable one
Machine Component details
Hot-melt coating unit
It adopts Q235 steel plate to weld into pedestal of gelatinizing unit and adopt hand-wheel to adjust the rotation of gluing head through worm gear and worm.
It adopts Q235 steel to make baseboard&shelf and precise chrome-plated 45# steel shaft for leading film.
Note: This unit should be worked with extra hot-melt glue container and gelatinizing head together.
It adopts seamless steel pump with wrapped red NBR to make main press roller.
It adopts bevel wheel (45# steel) finished by quenched to adjust the position of press roller through screw shaft, and the position removed data is shown in the display.