OTR50 Model Online Hot Stamping Machine
Hot stamping machine for PVC/ABS glass profiles
Hot wrapping machine for PVC/ABS glass profiles
Heat transfer machine for PVC glass profiles
Silver film wrapping machine for PVC glass profiles
Wuxi Yuda Light Industry Machinery Factory
Part 1. Application:
☆ This hot stamping machine is special designed for decorating various PVC/PS/WPC/ABS/PVC foaming small profiles within 50mm widths ;
☆ For this machine, it’s special used for stamping 4surfaces of profiles from top, bottom and both sides, special for ABS profiles for glass;
☆ The wall thickness of PVC profiles should be strong, or it can not bear high temperature;
☆ It is installed on the extrusion line, before Haul-off machine and after calibration table;
☆ The center height of machine is 1000mm per center height of extrusion line.
Part 2. The FOB shanghai price of OTR50 model online hot stamping M/C is
Part 3. The technical parameter of machine:
OTR50 Type Hot Stamping Machine
Max width of thermoprinting
for top&bottom surface of stamping heads
The speed of thermoprinting
1—10 m/min ( adjustable)
Thickness of panels
1.5*4=6kw by stainless steel heating loop
The total power
220V/380V 50 Hz
(L*W*H) 2400 × 1500× 1750 mm
Part 4: Basic assembly of OTR50
4.1) Transmitting unit
① The whole machine adopts rectangle steel and Q235 steel plate to weld.
② It adopts angle iron to make conveying table.
③ It adopts cast iron wrapped with nylon to make conveying wheel.
④ It adopts nylon to control the width of board.
4.2) The angle adjustment unit
① It adopts Q235 steel plate to make base-plate, clipboard and joint-plank.
② It adopts Q235 steel plate to make big circle wheel.
③ It adopts 160 hand-wheel to adjust thermo-stamping angle by worm wheel and worm.
4.3) The head of stamping control unit
① It adopts Q235 steel plate to make erect plank, plank of air cylinder; and 63*150 air cylinder to control the stamping head work back and forth.
② It adopts ZL102 with the copper slipcover to make guide thimble, and 45 steel for guide pole.
③ It adopts ZL102 to make slide seat, 45 steels for slide shaft and flat steel to make index plate.
4.4) The stamping/embossing head unit
① It adopts ZL102 to make base-plate of thermo-stamping which connect between slide shaft and slide seat.
② It adopts ZL102 to make heating cover and stainless steel heating pump(1.5w/pc) for heating, the temperature is controlled by TC Panel.
③ It adopts ZL102 wrapped with anti high temperature silicon rubber to make stamping wheel.
④ It adopts 25w gear speed-down motor to drive stamping roller by gears.
4.5) unwinding unit
① It adopts 45# steel to make shaft and Q235 to make joint plate.
② It adopts organic glass to make clamp for clamping film and aluminum loop to make fixed components.
③ It adopts 25w electronic timing gear speed-down motor to drive winding shaft by gears.
④ It adopts Q235 to make joint plate and 45# light&round steel to make shaft of guiding film.
4.6) Electric control unit
① It adopts cold rolled steel to make electric container.
② The electric components of equipment adopts famous brand in home market.
Part 5. Flow chart of OTR4100
Part 6. Payment and Delivery time
1) Delivery time: Approx. 35days from receipt of down payment.
2) Payment: 30% advance payment with order by T/T;
70% balance payment paid before shipment by T/T.
3) Guarantee: the machine is under warranty for one year, but not including the artificial wrong operation.
4) Assembling works: Machine can be installed and start up will be done by our technician at your workshop. This period will not exceed 5 days including the training of your 2 people. For this service a round trip airplane ticket (economy class) and accommodation& food expenses of our technician will be borne by you, and offer 100USD/day as technical subsidy for our technician.