ONLINE HOT STAMPING MACHINE(BETTER ONE) OTR300 Model
◎ We design this machine is special used for transfer printing designs from PET foil onto flat PVC panel online within 300mm wide, the machine will be installed before Haul-off and after calibration table.
◎ It has air expansion shaft as unwinding shaft and also adopt magnetic powder brake to control tension of PET foil;
◎It adopt heating system to stamp designs from PET foil onto PVC panel through silicon roller, so the machine working is much better than without heating system.
◎ It is installed on extrusion line, so the center height is 1m per extrusion line. If any special height, please let us know, we will make accordingly.
◎ The working speed of hot stamping machine is similar to extrusion line, so it can save two or three employees at least.
Technical parameter of machine:
Max width of hot stamping
The speed of hot stamping
Per speed of extrusion line
Thickness of panels
0.12kw for glue coating roller
Single phase,220V, 50 Hz
(L*W*H) 1500 × 1000× 1800 mm
When using as hot stamping
Use hot stamping glue