Golden Oak Interior & Exterior PVC Film/Foil for Windowsill/Window Profile Lamination

Golden Oak Interior & Exterior PVC Film/Foil for Windowsill/Window Profile Lamination

Decorating for PVC/PVC foaming/WPC/PVC skinning board as doors, windowsill, panels or etc.
Chat Now

Product Details

We normally believe that one's character decides products' quality, the details decides products' high-quality, while using the REALISTIC, EFFICIENT AND INNOVATIVE staff spirit for Upvc Profile Laminating Machine, PVC Hollow Door Printing Machine, Pvc Ceiling Panel Printing Machine. Over the years, our company adheres to the market demand-oriented, consumer needs as the core business philosophy and constantly develop new products. We follow a spirit of care about the world, dare to become a pioneer, having been ahead of the technology's leading edge research and development in the industry.

Introduction

FM800C Type Cold Glue Laminating Machine

For windowsill

 

1. Performance & Feature

● It is used for wrapping PVC film on the surfaces of various board from 200mm-800mm width;

● Decorating for PVC/PVC foaming/WPC/PVC skinning board as doors, windowsill, panels or etc.

● Adopt cycloidal reducer motor with frequency converter controlled to improve working accuracy.

● Adopt “TWO COMPONENTS SOLVENT POLYESTER ADHESIVE”.


Product pictures 1


The picture of machine and the picture of doors decorated by this machine

Product pictures 2 Product pictures 3

(The decorated doors and windowsill)


2. The technical parameters

max effective profile width

800mm

thickness of profiles

2-50mm

glue type

Two components solvent polyester adhesive

laminating speed

2-15m/min(adjustable)

transmission power

2.2kw

preheating power

800w*6pcs=4.8kw (infrared lamps)

power of top heating oven

3kw*3=9kw (by heating tubes)

power of small heating box

800w*4pcs=3.2kw (infrared lamps)

Heating roller

2kw

total power of machine

23kw

weight of machine

4500kg

visual sizes(L*W*H)

10750*1800*2250mm

 

3. The assembly of each unit

3.1)  Conveying unit*2units

① It adopts rectangular pipe to make the frame;

② The conveying roller is made of seamless steel pipe with shaft(made by 45# light and round steel)in the middle;

③ It adopts stainless steel plate to make conveying baffle;

④ It adopts handwheel to control the transmitting location;

3.2) Transmitting unit

① The whole frame adopts rectangular steel pipe and Q235 steel plate to weld;

② It adopts cast iron wrapped with NBR to make conveying roller;

③ It adopts 45# steel to make drive gear wheels and drive shafts, it adopts cast iron to make gears case;

④ It adopts 3KW cycloid pin-wheel speed reducer motor as drive power;

⑤ It adopts double line chain wheel(45#) and double line chains as drive medium;

3.3) Coating agent for easy adhesive

① It adopts 1.2mm stainless steel plate to make flume and coating glue case;

② It adopts 1/4″copper ball valve to control the flux of agent for easy adhesive;

③ It adopts 20mm wool felt to coating agent for easy adhesive on the surface of the materials;

3.4) Heating unit

① t adopts 1.5mm cold rolling steel plate to make heating oven, and the heating power is 17KW;

② It adopts far infrared quartz pipe to heat;

3.5) Unwinding unit

① It adopts Q235 steel plate to make wallboard;

② It adopts pneumatic core shaft as unwinding shaft;

③ It adopts magnetic powder brake(5kgs) to control the tension;

④ It adopts hard aluminum pipe to make guide film roller;

⑤ It adopts automatic rectify deviation controller to control the location of film laminating;

3.6) Scraping glue on film

① It adopts hard casting aluminum to make glue case;

② It adopts 45# steel to make scraping blade to control the quantity of glue and control the gluing width and location block;

③ It adopts Q235 steel after polished on the surface to make base board and pedestal;

3.7) Compounding unit

① It adopts seamless steel pipe wrapped with blue NBR to make main press roller;

② It adopts 45# light and round steel wrapped with blue NBR to make model wheels;

③ It adopts plastic welding torch to heat when compounding;

3.8) Electric panel

It welds by cold rolled steel boards (thickness1.5mm) then finishes by paint. The inside is installed the contactor, inductor, capacitance, fuse, air switch and line bank. The surface of panel is various buttons, knobs, urgent switches, temperature controllers and transducers, etc.

 

4. The flow chart of FM800C Type Laminating Machine for windowsill

Product pictures 4


5. Payment and Delivery Terms:

1) Delivery time: Approx. 50days from receipt of down payment.

2) Payment: 30% advance payment with order.

70% left payment paid before shipment.

3) Guarantee: the machine is under warranty for one year, but not including the artificial wrong operation.


After years of exploration, our Golden Oak Interior & Exterior PVC Film/Foil for Windowsill/Window Profile Lamination has condensed the world's cutting-edge technology, hoping that it will come closer to the needs of consumers. For anyone who wants to know about our company and products, please contact us as soon as possible. We will wholeheartedly provide you with the excellent services and products. For a long time, our company has paid special attention to scientific research investment, and we adhere to the people-oriented concept of scientific research, develop.

Inquiry

You Might Also Like