RTM300C Type cold glue Multifunctional Laminating Machine
◆ It is used to wrapping PVC decorative film on the surface of various extruded profiles, such as PVC/WPC/PVC foam/WPC foam/MDF profiles as ceiling, wall panel, wall skirting, door frame, window profiles and corners for ceiling and etc.
2. The technical parameters
max effective profile width
thickness of profiles
3-80mm(adjustable, it also can make per the thickness of profiles)
total power of machine
weight of machine
3. The assembly of each unit
3.1) Transmitting part
① The whole machine adoption 10#and 8# the slot steel and Q235 steel plate weld but.
② It adopts the cast iron wrapped with NBR manufactures the conveying wheel.
3.2) Cleaning unit
① It adopts hog bristle to make brush and cold steel board as brush cover.
② It adopts big round brush to clean the dust of panel.
3.3) Heating unit
① It adopts 1.5mm cold steel plank to make heating oven and heating passage, the heating power is 6kw.
② It adopts far infrared quartz lamp to heat.
3.4) Unwinding unit
① It adopts magnetic powder arrester to control tension.
② The solid aluminum pump to make guiding roller for film
3.5) Gluing unit (sealed scraping & coating method)
① it adopts casting aluminum to make glue container.
② it adopts 45# steel to make scrapper and limiting stopper.
③ it adopts Q235 steel after finished flat to make sub face plate and plinth.
3.6) Compound unit
① It adopts seamless steel pump with wrapped red NBR to make main press roller.
② It adopts 45# round steel to make model shaft, install shaft and joint heads, etc.
4. The flow chart of RTM300 for PVC panel
5. The photo of spare parts matching with machine
(80sets of joint shafts, 80sets of joint blocks,80sets of gimbles, 80sets of various press silicon rollers, 4pcs of heater)