Anti-UV Exterior Use Laminating/Lamination PVC Film/Foil for U-PVC Profiles

Anti-UV Exterior Use Laminating/Lamination PVC Film/Foil for U-PVC Profiles

Decorating for PVC/PVC foaming/WPC/PVC skinning board as doors, windowsill, panels or etc.
Chat Now

Product Details

Looking forward to the future, we will be more active to meet the challenges of the market and provide our customers with competitive, practical and efficient Edge Frame Profile Wrapping Veneer Machine, Automatic Slitting Machine For Pvc Film, Hot Stamping Machine For Pmma Edgebands. Over the years, our company has always adhered to the 'technology to improve the quality of products, to expand the image of the enterprise through cooperation' as a core content of corporate culture. We adhere to the quality policy of 'survive by quality, promote development by brand', constantly improve the quality of our products, and improve our comprehensive strength to meet customer needs. These are quality tested at various occasions to ensure only flawless range is delivered to customers, we also customize the array as per the need of customers to meet the requirement of customers. We will continue to achieve leapfrog development with a rigorous attitude and innovative spirit.

Introduction

FM800C Type Cold Glue Laminating Machine

For windowsill

 

1. Performance & Feature

● It is used for wrapping PVC film on the surfaces of various board from 200mm-800mm width;

● Decorating for PVC/PVC foaming/WPC/PVC skinning board as doors, windowsill, panels or etc.

● Adopt cycloidal reducer motor with frequency converter controlled to improve working accuracy.

● Adopt “TWO COMPONENTS SOLVENT POLYESTER ADHESIVE”.


Product pictures 1


The picture of machine and the picture of doors decorated by this machine

Product pictures 2 Product pictures 3

(The decorated doors and windowsill)


2. The technical parameters

max effective profile width

800mm

thickness of profiles

2-50mm

glue type

Two components solvent polyester adhesive

laminating speed

2-15m/min(adjustable)

transmission power

2.2kw

preheating power

800w*6pcs=4.8kw (infrared lamps)

power of top heating oven

3kw*3=9kw (by heating tubes)

power of small heating box

800w*4pcs=3.2kw (infrared lamps)

Heating roller

2kw

total power of machine

23kw

weight of machine

4500kg

visual sizes(L*W*H)

10750*1800*2250mm

 

3. The assembly of each unit

3.1)  Conveying unit*2units

① It adopts rectangular pipe to make the frame;

② The conveying roller is made of seamless steel pipe with shaft(made by 45# light and round steel)in the middle;

③ It adopts stainless steel plate to make conveying baffle;

④ It adopts handwheel to control the transmitting location;

3.2) Transmitting unit

① The whole frame adopts rectangular steel pipe and Q235 steel plate to weld;

② It adopts cast iron wrapped with NBR to make conveying roller;

③ It adopts 45# steel to make drive gear wheels and drive shafts, it adopts cast iron to make gears case;

④ It adopts 3KW cycloid pin-wheel speed reducer motor as drive power;

⑤ It adopts double line chain wheel(45#) and double line chains as drive medium;

3.3) Coating agent for easy adhesive

① It adopts 1.2mm stainless steel plate to make flume and coating glue case;

② It adopts 1/4″copper ball valve to control the flux of agent for easy adhesive;

③ It adopts 20mm wool felt to coating agent for easy adhesive on the surface of the materials;

3.4) Heating unit

① t adopts 1.5mm cold rolling steel plate to make heating oven, and the heating power is 17KW;

② It adopts far infrared quartz pipe to heat;

3.5) Unwinding unit

① It adopts Q235 steel plate to make wallboard;

② It adopts pneumatic core shaft as unwinding shaft;

③ It adopts magnetic powder brake(5kgs) to control the tension;

④ It adopts hard aluminum pipe to make guide film roller;

⑤ It adopts automatic rectify deviation controller to control the location of film laminating;

3.6) Scraping glue on film

① It adopts hard casting aluminum to make glue case;

② It adopts 45# steel to make scraping blade to control the quantity of glue and control the gluing width and location block;

③ It adopts Q235 steel after polished on the surface to make base board and pedestal;

3.7) Compounding unit

① It adopts seamless steel pipe wrapped with blue NBR to make main press roller;

② It adopts 45# light and round steel wrapped with blue NBR to make model wheels;

③ It adopts plastic welding torch to heat when compounding;

3.8) Electric panel

It welds by cold rolled steel boards (thickness1.5mm) then finishes by paint. The inside is installed the contactor, inductor, capacitance, fuse, air switch and line bank. The surface of panel is various buttons, knobs, urgent switches, temperature controllers and transducers, etc.

 

4. The flow chart of FM800C Type Laminating Machine for windowsill

Product pictures 4


5. Payment and Delivery Terms:

1) Delivery time: Approx. 50days from receipt of down payment.

2) Payment: 30% advance payment with order.

70% left payment paid before shipment.

3) Guarantee: the machine is under warranty for one year, but not including the artificial wrong operation.


With the changes of the market, we will further improve the scientific and technological content of our Anti-UV Exterior Use Laminating/Lamination PVC Film/Foil for U-PVC Profiles, and constantly introduce new products to meet the needs of our customers, so that our products and the progress of the society perfectly combined. 'Provide every customer with good products and trustworthy after-sales service' is our primary purpose for striving forward. Welcome new and old customers to visit the factory and discuss cooperation. Solution lists and thorough parameters and any other info will be sent for you timely for the inquiries.

Inquiry

You Might Also Like