Hot stamping PVC panel extrusion line Introduction
OTR600 Model Online Hot Stamping Machine
(the photo of machine for reference)
(actual machine is made per above flow chart)
1. Performance and Feature
● We design this machine is special used for heat transfer printing designs from PET foil onto flat PVC panel by low temperature(60-80degree), the temperature can be adjustable per different thickness requirement;
● It is installed on extrusion line, before Haul-Off Machine and after Calibration Machine, the transmission is drove by Haul-off machine;
● The center height of M/C is 1m per height of extrusion line & max decorating width is 600mm.
(PVC panels decorated by hot stamping)
2. The technical parameter of machine:
Items | Technical Parameters |
Max width of hot stamping | 600mm |
The speed of hot stamping | Per speed of extrusion line |
Thickness of panels | 2—50 mm |
Transmission power | 0.18kw |
Heating power | 5kw |
Total power | 5.2kw |
Power source | 380V, 50 Hz |
Visual sizes | (L*W*H) 1500 × 1300× 1950 mm |
When using as hot stamping | Use hot stamping glue, 20g/sq.m |
Hot stamping foil | ≈1.5RMB/sq.m |
Total cost of foil and glue | Around 1.9RMB/sq.m or less |
3. The payment term:
30% down payment when sign the contract by T/T;
70% balance payment before shipping by T/T.
The delivery: 40days to manufacture machine from the date of received down payment.
The warranty term: 1year for machine and half year for electric parts, except the artificial damage.