PVC Ceiling Panel Printing Machine

This machine is used for printing designs and coating UV lacquer on the surface of PVC panel as ceilings or wall panels;
Chat Now

Product Details

Introduction

YBW2600 Type Two-color Printing & UV glazing Machine

Product pictures 1


Product pictures 2 Product pictures 3


1. Performance and Application:

1) This machine is used for printing designs and coating UV lacquer on the surface of PVC panel as ceilings or wall panels;

2) The max. printing width is 600mm and the max printing thickness is 3-30mm;

3) The center height of machine is 740mm;

4) The printing speed V=2~30m/min;

5) This machine can decorate panel ceiling with Matt and shine effect.

6) It adopts solvent inks to printing designs and UV varnish/lacquer to coating protective transparent layer.


2. The flow chart of YBW2600

Product pictures 4


3. Technical parameter of YBW2600

1

Max. printing width

600mm(it can print two pcs of panel at one time)

2

Printing color

2-color

3

Printing speed

2~25m/min

4

Thickness of panel

2~30mm

5

Electric heating power

9kw

6

UV curing power

5kw*3pcs=15kw

7

Transmission power

3kw

8

Total power

29kw

9

Power supply

380V,50Hz

10

Visual sizes(L*W*H)

19400*1640*1600mm

11

Consumption of ink

6-8g/m2

12

Consumption of UV lacquer

8-12g/m2

13

Container loading

1*40GP, left 2.3m free space


4. Every scheme and performance of every part:

The first part: Conveying unit (to feeding in panels and cleaning surfaces by round brushes)

1. The frame of this unit is made of 8# channel steel.

2. It adopts seamless pipe(45#steel shaft in the middle) with decorative pattern to make conveying roller.

3. It adopts green conveying belt to transmit and it has baffle boards (45#steel made) in the both sides to prevent deviation.

4. It adopts Q235 steel to make baffle board to control the width of boards.

5. It adopts two pieces of round brushes with gear motor to clean surface of panel.


Product pictures 5


The second part: Printing & UV Glazing unit (to printing designs by color inks and coating UV lacquer to protect ink no fading.)

1. The frame of this unit is made of 10# channel steel.

2. It adopts cast iron to make wallboard.

3. The conveying roller and press roller adopt seamless steel pipe(45#steel shaft in the middle) wrapped NBR to make; air cylinder to control clutch.

4. The joint shaft is made of 45# steel and rockshaft is made of cast iron.

5. It adopts brush to clean and blast machine to remove the dust.

6. The printing roller and glazing roller are made of seamless steel pipe(45#steel core) wrapped with PU rubber.

7. It adopts seamless steel pipe to make printing roller.

8. The metric roller is made of seamless steel pipe(45#steel core) after finished chrome plated.

9. The air cylinder is used to control the clutch of printing gluing roller and knurled nut to control metric roller by hands.

10. It adopts cast iron to make wallboard of printing cleaning unit.

11. It adopts cast iron and 45# steel made worm gear and worm shaft and gears to control angle and the knife is aluminum made and scrapper blade is imported.

12. It adopts stainless steel board to make ink tray and liquid channel.

13. The drive motor is cycloid speed reducing motor(3kw) and controlled by transducer.

14. It adopts double-lined chain wheels and drive shaft to joint; The drive shaft and cross shaft are droved through hypoid gear(made by 45# after fired) first, then through recti-gear(made of cast iron) to drive.

15. It adopts cold rolled steel plate with painted on the surface to make the cover of this unit.


Product pictures 6


The third Part: heating and flattening unit (to heating and melting UV lacquer, which can make UV lacquer spread even on the panel, but also can make solvent from UV lacquer volatilized.)

1. The frame of this unit is made of 8# channel steel.

2. It adopts four pieces green conveying belt to transmit.

3. It adopts tension roller which is made of seamless steel pipe(45# steel core ) and finished by becoming blue to control the belts and cast iron made device to prevent belts deviation.

4. It adopts 1.5mm thickness cold rolled steel board to make heating oven and heating power is 4kw.

5. The drive device is chain wheel(made by 45# steel ).


Product pictures 7


The fourth part: UV curing unit (to drying and curing UV lacquer from ray of UV lamps.)

1. The frame of this unit is made of 8# channel steel.

2. The conveying roller(outside of container) and press roller adopt seamless steel pipe(45#steel shaft in the middle) wrapped NBR to make; the conveying roller(in the container) is made of 45# steel.

3. It adopts 2mm cold rolled steel plate to make solidified container; ventilating fan to vent (0.75kw); 3 pieces ultra violet lumps to light(5kw); 3 sets transformers.

4. The drive device is chain wheel(made by 45# steel ).

5. It adopts 1.5mm cold rolled steel plate with painted on the surface to make the cover of this unit.


Product pictures 8


5. Company advantages and services

Yuda Machinery Co.,Ltd is leading supplier of plastic extrusion equipment and PVC ceiling printing machine from China.

We always believe that excellent product quality,reasonable price and professional in time service is the basis for long term cooperation with our clients.


Our Services

1. 1 year warranty.

2. Professional engineer available to customer's country until the workers know how to operate.

3. Offer the technology data and relative files .

4. Provide lifelong guidance.

5. Low prices for easy-broken parts.


Inquiry