Use Of Laminating Machine

- Feb 10, 2019-

1. Reasonable Choice of Laminator When selecting a laminating machine, the first factor to consider is the area of the laminator. To choose a strong compatibility area, consider the opening method, appearance and so on. Use as many machines as possible. After the selection is completed, install and debug under the guidance of the manufacturer, and enter the normal production and use.

2. The laminator enters the working state After the self-test is completed, the laminating machine can enter the working state.

3. Operation procedure: Press the vacuum pump on button ------ check the process parameters ------ check whether the temperature reaches the set value ------ check whether the working status is automatic or manual, to set the automatic status ------Check if the vacuum pump is short of oil ------ Put the components to be laminated ------Cover ------Check the vacuum ------Remove the components -- ----Check the components. The laminator enters normal operation while ensuring that all processes are normal.

侧面印刷 (2)

4. Laminator stop: All power is required to be turned off when the laminator is shut down. To ensure that it is not mishandled by non-operators, the emergency button can be included in the shutdown range. The operation procedure is as follows: Vacuum pump off ------ cover (the cover does not need to be tight) ------ heat off ------ power off ------ press the emergency button ----- - Close the main gate or: Press the emergency button ------ close the main gate.

5. How to use the laminating machine after parking for a period of time: After the laminating machine is parked for a period of time, it should be started according to the normal procedure. Do not put the battery board, run the air machine for two cycles, and remove the water vapor absorbed in the machine. Can be used normally.