The Operation Of The Hot Stamping Machine For Pvc Panels

- Nov 21, 2020-

The hot stamping machine pulls up the rocker, makes the heating plate fully open, plug in the power, turn on the main power switch, and the indicator light is on; adjust the left temperature regulator (the three buttons represent the ones, tens, and hundreds respectively), Press + or-to adjust to the appropriate temperature (150°C-200°C), and the heating time is about 15-20 minutes; adjust the timer knob on the right to adjust to the appropriate time. When the temperature reaches the set value, the machine will automatically enter the constant temperature Status: Lay the plate flat on the printing table, and then stack the picture (the size of the picture page must be larger than the plate size to prevent indentation on the edge and affect the final effect of the product), press the rocker firmly; Note: no pressure Too large, otherwise it will cause the rocker to deform. When the time is up, the buzzer will sound, then lift the rocker, take out the plate (after taking it out must be immersed in cold water to prevent the ink from spreading), dry it; the temperature of the roasted metal plate is generally 170-180℃, The time is 20-40 seconds, the temperature of the porcelain plate is generally 180-190℃, and the time is 60-90 seconds.

https://www.cnyudajixie.com