Correct Operating Specifications For Edge Banding Machines

- Jan 15, 2019-

As an indispensable mechanical tool in the production process, the edge banding machine is very strict in its operation. The use of the edge banding machine must pay more attention. Once the operation is improper, it is easy to cause an accident and pose a hidden danger to the safety of the operator.


First, the conveyor belt of the automatic edge banding machine and the conveyor belt motor are forbidden to be knocked to avoid damage to the motor, resulting in failure of the edge banding machine and unnecessary losses.


Second, the guide rail of the automatic edge banding machine should be kept in a flat state, and it is better to carry out the quenching process to increase the service life of the guide rail and reduce the damage frequency of the guide rail.


Third, the bearings of the automatic edge banding machine are made of imported bearings, and are installed in strict accordance with the installation steps. The pulley parts and the rubber parts of the bearings are properly installed to prevent the automatic edge banding machine from being used due to installation problems, which affects the production line. get on.


Fourth, the transmission chain of the automatic edge banding machine should be kept within a moderate range, and it should not be too tight or too loose, which affects the working efficiency of the edge banding machine.


Fifth, the machined parts of the automatic edge banding machine must be processed according to the requirements of the parts drawings. It cannot be processed without the own view paper. If this happens, it must be reworked, which is not worth the loss.


Before the operator can operate, he must be familiar with the performance, use and operation precautions of the machine. It is strictly forbidden to operate on the machine alone. The operator must wear appropriate clothing during operation, no gloves are allowed, and non-operators must not access the work machine. The operator cannot leave long hair and is not allowed to wear a necklace to avoid being involved in the edge banding machine and causing injury.