Many incorrect operations of the automatic hot stamping machine will have varying degrees of impact on the product, so it is necessary to explain to all operators in order to train the true correct operation method and improve product quality. 1. The work of the module has been completed. It will cut the plastic film material, then feed the cutting tool into the material, and then push the cutting area forward. 2. Press the cutting switch of the automatic hot stamping machine with both hands. After cutting the material, stop the automatic hot stamping machine and automatic hot stamping machine. 3. If the material is not completely cut during the stamping process, adjust the cutting depth controller. The automatic hot stamping machine will rotate the "pressure" system clockwise in the direction of twisting. If the plastic film is molded too deep by the knife, it will "pressure system" adjust the cutting depth counterclockwise, trying to make the mold slightly press into a date. 4. The automatic hot stamping machine will pull the cutting area of the feed plate to remove the material, thus completing the cutting plane stamping process. The method of the automatic hot stamping machine is mainly used for continuous feeding, that is, there is always some overlap between the front and rear sheets. This means smooth and fast, but quick adjustment of positioning has a great impact. Before this article, the force of the paper roll or rebound will result in positioning permission.