Pvc foaming baseboard hot stamping machine features and steps

- Apr 12, 2019-

The difference between pvc foaming baseboard hot stamping machine and ordinary machine is that it has intelligent digital temperature time display, automatic constant temperature, automatic timing and other functions; pvc foaming baseboard hot stamping machine's heating plate and heating plate are integrated into one It is safe, durable and evenly distributed. It uses a high temperature resistant silicone backing plate to make the baking pressure more uniform, 300 °C without deformation; in addition, there is automatic time control; pressure adjustment is convenient.


When the pvc foaming baseboard hot stamping machine is operated, the joystick needs to be pulled up first, so that the heating plate is fully opened and plugged in, the main power switch is turned on, the indicator light is on; then the left temperature regulator is adjusted, press + Or - adjust to the appropriate temperature, the heating time is about 15-20 minutes; adjust the right timer knob to adjust to the appropriate time.


When the temperature of the pvc foaming baseboard hot stamping machine reaches the set value, the machine will automatically enter the constant temperature state; the plate will be placed flat on the printing table, then the picture will be stacked, and the rocker will be pressed down forcefully; Too large, otherwise it will cause the rocker to deform. When the time is up, the buzzer will sound. At this time, lift the rocker, take out the plate, and dry it.