Hot stamping machine for tee profile temperature and environmental requirements

- May 31, 2019-

The effect of the hot stamping machine for tee profile depends to a certain extent on the level of temperature, pressure and bronzing speed. Therefore, to control the quality of bronzing, you should master a reasonable bronzing temperature, bronzing pressure and bronzing speed. This creates good conditions for bronzing, and finally the quality of bronzing can be guaranteed.

Hot stamping machine for tee profile operating temperature

The temperature of the hot stamping machine for tee profile has a very important influence on the hot stamping. The temperature must be controlled within the corresponding range, so that the dyed resin layer and the adhesive are moderately melted to ensure good transfer of the aluminum layer.

If the temperature is too high, the melting is excessive, and the anodized aluminum around the hot stamping image is also melted and peeled off to produce a paste. At the same time, the high temperature causes chemical changes in the electrochemically colored aluminum dyed resin and the aluminum layer, and the brightness of the hot stamping product is lowered and the metallic luster is lost. Even the imprints appear hazy or blistering; but if the temperature is too low, the melting is not sufficient, it will cause hot stamping or hot stamping, the imprint is not strong, easy to fall off, or the lack of stroke, imprinting and flowering.

Hot stamping machine for tee profile environment

The hot stamping machine for tee profile should be installed in a place that is dry, ventilated, light and easy to operate.www.cnyudajixie.com