Hot stamping machine for pvc foam skirtings with good attention and gloss

- May 24, 2019-

The hot stamping machine for pvc foam skirtings is in contact with the hot stamping plate and the substrate under the action of the combined pressure. The hot stamping plate has a certain heat due to the heating of the electric heating plate, and the electrochemical aluminum is heated to make the hot melt dyed resin layer and When the adhesive melts, the adhesion of the dyed resin layer is reduced, and the viscosity of the special heat-sensitive adhesive is increased after melting, and the aluminum layer and the electrochemical aluminum base film are peeled off and transferred to the substrate, and the adhesive is rapidly cooled and solidified as the pressure is removed. The aluminum layer is firmly attached to the substrate to complete a hot stamping process.

Hot stamping machine for pvc foam skirtings from the composition of electro-aluminum and hot stamping mechanism, in order to obtain the ideal hot stamping effect, the electro-chemical aluminum foil used for hot stamping must meet the following requirements: the bottom layer is evenly colored, there is no obvious color difference, color strip And color spots, the primer coating is uniform, smooth, white and free of impurities, no obvious stripes, sand spots and oxidation, good gloss, strong firmness, high definition and correct model.

Hot stamping machine for pvc foam skirtings precautions

1. Small bronzing machines must choose the appropriate hot stamping foil according to the different types of items to be burned. When hot stamping, you must master the three-way cooperation of temperature, pressure and hot stamping speed, and it will be different according to the hot stamping material and hot stamping area.

2. The speed and direction of the turning tool should be mastered when cutting.

3. Electro-aluminum hot stamping foil should use paper, ink (especially black ink), kerosene, composite glue suitable for the property, and the hot stamping must be kept dry.

Dry to avoid oxidation or damage to the bronzing layer.

4. The general packaging is: 64CM × 120M one roll, one box for every 10 rolls; the customizable width is 64CM, the length is 120M or 360m large roll or other special specifications.

5. Store it in a cool, ventilated place when standing, anti-pressure, moisture-proof, heat-proof, and sun-proof.www.cnyudajixie.com