Film wrapping machine for pvc ceiling panels features and processing efficiency

- May 29, 2019-

Film wrapping machine for pvc ceiling panels adopts water-based coating glue and oil-based coating glue to coat pvc film, varnish paper, etc. on the surface of various skirting lines, door and window sets, stair railings, etc. The angle, the arc, the groove, the concave and convex surface, the beading, etc. are completed at one time, and the surface, the side surface and the bottom side are covered at one time. High processing efficiency.

Characteristics of film wrapping machine for pvc ceiling panels

1. The bottom wheel is all made of silicone wheel, which has good wear resistance, no glue and long service life.

2, the rubber roller is used with the scraper, the operation is simple, and the glue coating has high gloss.

3. The coating speed is controlled by electromagnetic speed control motor, which can be adjusted within a larger range.

4, using worm gear transmission, high stability, long service life, high product qualification rate.

Film wrapping machine for pvc ceiling panels cladding material

1, the substrate: wood lines, MDF, wood plastic, plastic steel, PVC, aluminum profiles and other lines. Substrate requirements: For regular line profiles, there may be grooves and curved surfaces, but each point must be straight in the longitudinal direction and have a certain pressure resistance. The length is generally 40 cm or more to infinity.

2, veneer materials: PVC decorative film, decorative paper, solid wood leather, Boeing board, composite aluminum film. The width is determined by the substrate requirements and the selected model, typically less than 50