Causes of wrinkles in automatic Hot Stamping Machine For PVC Ceiling Panel

- Jan 25, 2021-

1. The first is the temperature of the hot stamping machine of the automatic hot stamping machine. In many cases, the cause of the wrinkles in the automatic hot stamping machine is the temperature setting. Sometimes, the built-in temperature device of the automatic hot stamping machine does not perform well. As a result, this also caused the automatic hot stamping machine to wrinkle when the hot stamping is slightly inferior.

2. The aging of some parts of the automatic hot stamping machine itself, due to the long-used automatic hot stamping machine or the second-hand automatic hot stamping machine, the stretching tension generated during use is not enough, and the surface of the hot stamping paper is wrinkled Case. Even if the automatic hot stamping machine can flatten the paper, it will not last long, and wrinkles will appear.

3. There is another important reason for the wrinkles of the automatic hot stamping machine. The hot stamping fixture and the substrate of the hot stamping machine cannot be combined smoothly. Because the bottom of the hot stamping roller shaft is very easy to bulge, this creates an uneven surface. Place the hot stamping Paper, hot-stamped products, so that hot stamping wrinkles easily appear after adjustment.

https://www.cnyudajixie.com