Hot Stamping Machine For Pvc Panels
Hot Stamping Machine can make Pvc Panel profiles which can replace the traditional wooden profiles, the costs are much lower and the quality is much better than wooden profiles.
This OTR100 Model hot stamping machine is special designed for decorating various PVC/PS/WPC/ABS/PVC foaming small profiles within 100mm widths; Now it is special used to decorating imitation marble stone profiles.
☆ Normally for PVC marble profiles, there have 5-9surfaces, so we always match 10sets of online hot stamping machine to get complete marble designs.
☆ For PS picture frame, it also need match 5-10sets, some for embossing, some for hot stamping, that will depended on the designs.
OTR100 Type Hot Stamping Machine
Max width of thermoprinting
Max transmitting width
The speed of thermoprinting
1—10 m/min ( adjustable)
Thickness of panels
0.12 KW(with timing motor)
1.5KW by stainless steel heating loop
The total power
380V, 50 Hz
(L*W*H) 750 × 750× 2000 mm
Basic assembly of OTR100
1) Transmitting unit
The whole machine adopts 50*50 square tube and Q235 steel plate to weld.
2) The angle adjustment unit
It adopts 160 hand-wheel to adjust thermoprinting angle by worm wheel and worm.
3) The head of stamping control unit
Adopts ZL102 with the copper slipcover to make guide thimble, and 45 steel for guide pole.
4) The stamping head unit
It adopts ZL102 to make heating cover and 2 stainless steel heating pump(650w/pc) for heating, the temperature is controlled by TC Panel.It adopts 45 steels to make axle and seat of thermoprinting.
5) winding & unwinding unit
It adopts 25w electronic timing gear speed-down motor to drive winding shaft by gears.
6) Electric control unit
The electric components of equipment adopts famous brand in home market.