Description of hot stamping machine for abs fridge profiles
Part 1. Application:
☆ This OTR100 Model hot stamping machine is special designed for decorating various PVC/PS/WPC/ABS/PVC foaming small profiles within 100mm widths; Now it is special used to decorating imitation marble stone profiles;
☆ Normally for PVC marble profiles, there have 5-9surfaces, so we always match 10sets of online hot stamping machine to get complete marble designs;
☆ For PS picture frame, it also need match 5-10sets, some for embossing, some for hot stamping, that will depended on the designs.
☆ It is installed on the extrusion line, before Haul-off machine and after calibration table;
☆ The center height of machine is 1000mm per center height of extrusion line.
Part2. The technical parameter of machine:
OTR100 Type Hot Stamping Machine
Max width of thermoprinting
Max transmitting width
The speed of thermoprinting
1—10 m/min ( adjustable)
Thickness of panels
0.12 KW(with timing motor)
1.5KW by stainless steel heating loop
The total power
380V, 50 Hz
(L*W*H) 750 × 750× 2000 mm
Part 3: Basic assembly of OTR100
3.1) The stamping head unit
① It adopts ZL102 to make base-plate of thermoprinting which connect between slide shaft and slide seat.
② It adopts ZL102 to make heating cover and 2 stainless steel heating pump(650w/pc) for heating, the temperature is controlled by TC Panel.
It adopts 45 steels to make axle and seat of thermoprinting.
③ It adopts ZL102 wrapped with anti high temperature silicon rubber to make stamping wheel.
④ It adopts 25w gear speed-down motor to drive stamping roller by gears.
3.3) winding & unwinding unit
① It adopts 45# steel to make shaft and Q235 to make joint plate.
② It adopts organic glass to make clamp for clamping film and aluminum loop to make fixed components.
③ It adopts 25w electronic timing gear speed-down motor to drive winding shaft by gears.
④ It adopts Q235 to make joint plate and 45# light&round steel to make shaft of guiding film.
3.4) Electric control unit
① It adopts cold rolled steel to make electric container.
② The electric components of equipment adopts famous brand in home market.
Part 4. Flow chart of OTR100