WPC DOORS DECORATED BY HOT STAMPING MACHINE
The above equipment is related to all the decoration equipment decorated by hot stamping methods and its installation machines. Just for door frame, we need to know shapes of them, then we can confirm if just need OTR5300 or OTR6100 or other models, thanks.
1. BSG2210TYPE WIDE DOUBLT-BELT SANDING MACHINE
◎ It is used to sanding the surface of WPC doors into even and smooth just because the extruded door is not very even and smooth, so it’s better to sanding then decorating, that will be better.
Technical Parameters of Sanding Machine
2. M25-X TYPE CNC ENGRAVING MACHINE
Performance and technical parameter:
◎ It is used to engraving designs on the WPC doors, screen, article windows to get empaistic patterns;
◎ It adopts vacuum absorption table, water cooling by 5.5kw water ring pump;
◎ The rotating speed of spindle motor is 24000r/min;
◎ The X,Y,Z shaft adopts imported linear guideway, which can make sure the precision of machine and also heavy loading;
◎ Max engraving size is 1300x2500x190mm;
◎ the diameter of blade is 3.175mm, 4mm, 6mm, and 12.7mm;
◎ The repeated positioning accuracy is <0.05mm/300mm;
◎ The power supply is AC380V±10%(50Hz).
Photo of engraving machine
3. TY1000 TYPE HOT STAMPING MACHINE FOR WPC DOORS&PVC HOLLOW DOORS
◎ It is used to heat transfer printing designs from hot stamping foil(i.e. PET foil) onto WPC/PVC/PVC foaming doors by high temperature (130-180℃), which make plastic doors like true wood; but also can do low temperature (60-80℃) hot stamping for PVC hollow doors with thin wall-thickness;
◎ It can decorating top surface and side surface of doors at one time;
◎ The max decorating width is 1000mm.
Technical parameter of TY1000
Effective thermo stamping width
Thermo stamping speed
Thickness of sheet
flow chart of TY1000
4. OTR5300 Type hot stamping machine for WPC door frame
◎ It is used to heat transfer printing designs from hot stamping foil(i.e. PET foil) onto WPC/PVC/PVC foaming door frame, which is matching with WPC doors together;
◎ Normally the max shapes of door frame is 5-surfaces, so we designed this model of hot stamping machine to decorating 5 surfaces at one time; if clients have special requirement, we also can make per clients’ products and special requirement;
◎ The max decorating width is 300mm.
Technical parameter of OTR5300
Flow chart of OTR5300
5. OTR6100 Type hot stamping machine for door profile(within 100mm width)
◎ It is used to heat transfer printing designs from hot stamping foil(i.e. PET foil) onto WPC/PVC/PVC foaming door profile and profiles for installing glass;
◎ Normally the max shapes of door frame is 6-surfaces, so we designed this model of hot stamping machine to decorating 6 surfaces at one time; if clients have special requirement, we also can make per clients’ products and special requirement;
◎ The max decorating width is 100mm.
The flow chart of OTR6100
6. MJ6132B TYPE DICING SAW FOR DOOR PROFILE
Photo of Saw Cutting Machine
7. QF1300 model Automatic Film Slitting Machine
◎ The standard width of hot stamping foil is 1250mm, but the doors and profiles have different width, so our slitting machine is used to slitting hot stamping foil into demanded width per profiles’ widths.
Noted: above machine list, they are offered by our domestic clients, who works in WPC door sets factory as workshop manager. For item 1, most of domestic WPC door sets factories use it, but if you can make WPC doors with flat surface, then no need. For item 2,7,8,9,10,11 used for make door styles&installation.