PVC Edge Banding Printing Line

YBW3600 Type Three-color Printing & UV glazing machine for edge band
Chat Now

Product Details

Introduction

YBW3600 Type Three-color Printing & UV glazing machine for edge band

(Designed for offline)


Product pictures 1


Product pictures 2


1. Design condition:

① This line is used to printing patterns and coating UV lacquer on the surface of wider PVC/ABS edge band.

② It can coat different UV varnish to get different effect like Matt, shine and high gloss, but high gloss effect is not good to slit, so better use it by whole sheets.

③ The effective printing width is 100~500mm, thickness of rolling material is: 0.3-1.2mm.

④ It adopts solvent printing ink and UV lacquer

⑤ Total 3-colors, one is background color, 2 is wood grain designs colors.

⑥ Speed V=2-15m/min.


2. The whole line consisting of:

- 1x double unwinding station

- 1x Haul-off station

- 1x background printing station

- 2x decoration printing station

- 2x 1.2m blow heating units for decoration printing

- 2x 3m blow heating units for decoration printing

- 1x UV lacquer coating station

- 1x UV curing station

- 2x haul-off stations (one set with water-cooling devices)

- 1x double rewinding station

- 5x pneumatic pumps

- 1x central PLC control system for complete line

Product pictures 3


Technical parameter of YBW3600

N[P]YRE9PHEVZ2)0F`RC415


3. Basic assembly of each unit and performance:

Part one: Unwinding Station

► It is used to unwinding the edge band rolls into printing line, with double unwinding shaft for easy change edge band rolls;

► Unwinder adopts brake to unwinding rolls;

► the aperture diameter of unwinding shaft is 76mm(we can make per your requirement);

► the max outside diameter for unwinding roll is 600mm;

►the center height is 800mm;


Product pictures 4(001) Product pictures 5(001)

(one shaft is 76mm, one shaft is 200mm, please confirm your EB roll diameter before order, thanks.)


►specification of unwinding station

BY`%EUC%9FB9V]N9I86ZYL5

Part Three: Background Printing Station

► it is used to printing base/background color on the bottom of PVC edge bands. Normally the extruded EB could not match the design wooden color very much, so it needs to printing base color on the EB, which can make top wooden grain design more vivid like true wood grains.

► we adopt double-roller station to printing base color, it can complete cover white color of EB into other colors like brown, black, red and etc. Just for EB, it’s better to make extruded EB with some colors which is near its printed designs, that will look more vivid. At that time, you can adopt one-roller station to printing base color, it’s more flexible.


Product pictures 6


►Specification of background color printing station

PO_R5)[`@C5FQ0I)I)7U%9A


Part Five:Design Printing Station (2units)

► It is used to printing wooden grains patterns or other patterns on the surface of PVC edge bands.

► It needs to make design cylinders, and install design cylinder on the machine. When machine running, the patterns from design cylinder will connect to PU rubber roller, the PU rubber roller will connect to edge band, the patterns will be transfer printed on the EB by inks.

► The different patterns will be engraved on their own cylinders, it’s an investment. You may offer us the pattern samples, we can make it per your sample for you.


Product pictures 7 Product pictures 8


►Specification of design printing station

G@9{MU84N2B7K4D$AY}_{BV


Part Six: UV coating unit (three-rollers)

► It is used to coating UV lacquer on the top of EB, which can get matt, shine and high gloss effect, and also it can protect design inks no fading and anti-scratch.

► Total three-roller station, if you want Matt or shine effect only, you can adopt first station to coating matt UV lacquer, if you want high gloss effect, you can adopt second and third station to coating high gloss UV lacquer.


Product pictures 9(001) Product pictures 10(001)


►Specification of UV glazing station

QNABW7(7YP0ISC]XD]HF(M3


Part Seven: IR heating & drying

► It is used to heating and melting UV lacquer by IR lamps, and also the solvent from UV lacquer can be volatilized after heating, so the bubble won’t be made on the EB.

► It adopts 6pcs of 500w IR lamps to drying base color inks.

► To protect electric controller won’t be splashed by inks, we install it on the IR dying station to control former station running.


►specification of 2.8m IR heating station

1

Effective drying width

500mm


2

Effective drying thickness

0.3-1.2mm

For EB

3

heating speed

1-25m/min


4

heating power

0.8kw*6=4.8kw

-by 6pcs of IR lamps

5

Blowing fan

50wx2pcs=100w

-blowing hot energy by blowing fan, so not easy to damage edge band

6

Total power of this station

4.9kw

-heating by 6pcs of 500w IR lamps

7

Transmission method


-By aluminum roller

8

Lifting method


-by 2pcs of air cylinders

9

Visual sizes

3000x 1100 x 1000

mm

10

Machine weight

350kgs



Part Eight: UV drying unit

►It is used to curing/drying UV lacquer because UV lacquer should be dried by rays from UV lamp, or it won’t drying naturally or IR lamps.

►It adopts 6pcs of UV lamps to drying UV lacquer, matching 6pcs of transformer+6pcs of capacitor to working together, it also have stronger and light rays, so you can adjust rays according to requirement.

►we adopts 4sets of 0.75kw Low Noise Centrifugal Blower to exhaust heating energy from oven out, so the EB is not easy to burn.


Product pictures 11


►specification of UV drying station

1

Effective drying width

500mm


2

Effective drying thickness

0.3-1.2mm

For EB

3

Drying speed

1-25m/min


4

Drying power

5kw*4=20kw

-drying by4pcs of 5kw UV lamps

5

Blower

0.75kw*4=3kw

-exhaust heat energy out of oven

-Low Noise Centrifugal Blower

6

Transmission method

/

-By pulling power from Haul-off Station

7

Oven open method


-by 2pcs of air cylinders

8

Total power of this station

23kw


9

Visual sizes

3000x 1400 x 1800

mm

10

Machine weight

≈1020kgs



Part Nine: Haul-off Station

► It is used to pulling wide EB and keep it running with pulling tension, then it won’t easy to falling down and affect printing effect;

► It is driven by servo motor and controlled with one PLC system, so it can keep each station at the same speed.

► In the last station of Haul-off, it has water cooling steel roller, which can cool EB from UV curing machine, before rewinding it, or it is easy bent.


Product pictures 12_副本 Product pictures 13(001)


►Specifications of Haul-off Station

1

Effective pulling width

500mm


2

Thickness of EB

0.3-1.2mm

Special for EB

3

working speed

1-25m/min


4

Pulling power

3kw/3kw

-by 1pc of 3kw Servo motor for each Haul-off MC

5

Pulling roller

ɸ240*700

-3pcs of steel roller, 1 drive roller, 2 driven rollers

-3pcs of them with heating in the inside

-top 1 drive roller, connect to servo motor directly

6

Pressing roller

ɸ240*700

-NBR rubber

- driven by top drive steel roller

7

Visual sizes of machine

600/800x1600x1600

mm

8

Machine weight

≈570/780kgs



Part Ten: rewinding unit

► It is used to rewinding edge band rolls after printing.

► It adopts torque motor to control winding speed.

► torque motor for winding machine is 40N.M.

► the operation table is 600mm wide.

►the center height is 800mm.


Product pictures 14_副本 Product pictures 15(001)

(one shaft is 76mm, one shaft is 200mm.)


►specification of rewinding station

1

Effective winding width

500mm


2

Thickness of EB

0.3-1.2mm

Special for EB

3

working speed

1-25m/min


4

rewinding shaft

ɸ76mmx800

-By 2pcs of air expansion shaft

- aperture diameter for shaft is 76mm, if you have special requirement, we can make it per yours.

5

Drive power

40N.Mx2pcs

-by 2pcs of 40N.M torque motors

6

Anti-static remover

1pc

-installed before rewinding,after haul-off station

7

Deviation rectify with photoelectric eye

1set

-to monitor EB running in correct direction

8

Visual sizes of machine

2400x1600x1600

mm

9

Machine weight

≈1590kgs



Part eleven: electric panel

► Except unwinder and rewinder, for other parts are controlled in one complete electric controller;

► All the controllers for servo motors are installed in this big electric controller, then encode in one running PLC system.


Product pictures 16 Product pictures 17


Request brand of electrical parts

No.

Description

Brand

Marks

1

PLC

Dongyuan

Taiwan

2

Touch screen

Dongyuan

Taiwan

3

Servo motor

Dongyuan

Taiwan

4

Air switch

Schneider


5

Contactor, reply...

Schneider


6

switches

Schneider


7

Temperature Controller

Omron




Inquiry